Table of Contents
Advertisement
MIC. P1 (F3)
MICROPHONE AMBIENCE
This section contains ambience effects relating to the microphone.
EFFECT STATUS at the top of the screen indicates whether the effect is
enabled (ON) or disabled (OFF).
The display shows 4 parameters, TYPE, LEVEL, TIME and FEEDBACK,
the last only activated if the DELAY effects are selected.
Let us now examine these parameters one by one:
TYPE
this parameter is used to choose the type of reverb to be assigned to
the microphone. There are 8 ambiences available, 6 for REVERB and
2 for DELAY effects, as follows:
REVERB
ROOM 1 - ROOM 2 - ROOM 3 - HALL 1 - HALL 2 - PLATE
DELAY
DELAY - PANDELAY
LEVEL
Parameter which sets the reverb output level, with values from 0 to
127.
TIME
parameter which sets the reverb duration or depth, with values from 0
to 8.
FEEDBACK
As already mentioned, this parameter is activated when the DELAY or
PANDELAY effect is chosen in the TYPE field.
Effects
Page 49
Advertisement
Table of Contents
