Sequencer Transposer; Removing Trasposition Quickly - Galileo Maestro II User Manual

Whenever you press TRANSPOSE – the display shows a decrease of
one semitone.
Whenever you press TRANSPOSE + the display shows an increase of
one semitone.
If you keep a button held down, the transposition changes continuously
until it reaches the maximum value (-12 or +12).

Sequencer Transposer

When you activate a transposition, you will see that the values on the
display change both against the keyboard icon and next to the sequencer
icon; this means that both devices are affected in the same way.
However, you may need to transpose only the keyboard or only the
sequencer, if you wish to play in a key different from that of the MIDI
file loaded earlier, or of the Song recorded directly on the instrument.
To do this, before transposing use the CURSOR keys to select the field
to which you wish to apply the transposition and then proceed.
Removing transposition quickly
+
To remove a transposition, press the TRANSPOSE -
and + buttons simultaneously.
The display will return to normal (0).
If we have applied different transpositions to the
sequencer and keyboard, the transposition will be
removed from both.
Galileo
Page 16