Table of Contents
Advertisement
SOUND SETTINGS (F2)
This function allows you to modify the values of the sends to the reverb
and modulation effects for each individual sound (Sound Preset).
Locate the CURSOR on the TIMBRE parameter and turn the ENCODER
to select the Preset for modification. As you turn the ENCODER you
will realise that the Presets marked with the
activate two more modules: Modulation Type and Speed. In other
words, for these sounds you can choose the type of modulation, from
those offered, and the speed of the modulant, with values from 0 to
127.
For the MIDI General Presets these two fields are not activated, so the
modulation parameter always refers to the CHORUS effect.
Modulation Type
This section contains three classic modulation effects and a Delay,
more often called an echo.
modulation effect which adds depth and a sense of space
CHORUS
to the sound.
modulation effect similar to the resonance obtained inside
FLANGER
a tunnel.
an effect which simulates a rotary diffuser.
ROTARY
DELAY
Use the CURSOR keys to select the MOD. TYPE parameter and turn the
ENCODER to select the effect. To change the modulation SPEED
parameter, locate the CURSOR on the parameter and turn the ENCODER
to change the value, except for the ROTARY effect, which is modulated
as follows.
Effects
typical echo effect.
i
(i-motion) symbol
Page 47
Advertisement
Table of Contents
