Operation; Start-Up; Switching Off; Zeroing - KERN EWJ Operating Instructions Manual

7 Operation

7.1 Start-up


Press .
The display is shining and the motor noise of the loading system for the internal
adjustment weight can be heard.
The balance carries out a selftest, the maximum load and software version will
also be shortly displayed, followed by the internal adjustment. During this
process „CAL" appears in the display.
As soon as the weight display appears, the balance is ready for weighing.

7.2 Switching Off

 Press
, the display will disappear.

7.3 Zeroing

Resetting to zero corrects the influence of light soiling on the weighing plate.
 Unload the balance
 Press
and zero display as well as indicator
7.4 Simple weighing
 Place goods to be weighed on balance.
 Wait for stability display
 Read weighing result.
Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus a
possibly existing tare load, must be strictly avoided. This could damage the
instrument.
Exceeding maximum load is indicated by the display of „----" and an audio
sound. Unload weighing system or reduce preload.
18
.
will appear.
EWJ-BA-e-1411