Table of Contents
Advertisement
Main Menu
Setting Summer Time
When summer time is used in
another city, summer time can be
set for that city.
1.
Hold down C for about two
seconds.
After [DST Hold] is displayed,
switch summer time ON or
OFF.
The DST indicator is lit
while summer time is set.
WORLDWIDE
Manuals
a. City name
b. DST indicator
STB-1000
2.
Press B four times to return
to the Timekeeping Mode.
Main Menu
Alarm
At the specified time, alerted by
beep or vibration.
Looking Up Times in
【Preparation】
Other Countries
The procedure here is performed
in the Alarm Mode. Press B to
Setting Summer Time
switch to the Alarm Mode.
See:
Mode Switching
(Alarm Mode)
Top of Page
in the Alarm Mode. Press B to
switch to the Alarm Mode.
Operation Guide 3423
See:
Mode Switching
(Alarm Mode)
Manuals
STB-1000
a. Current time
Main Menu
Setting an Alarm Time
Setting an Alarm Time
Turning OFF an Alarm
1.
Press D to select the alarm
screen you want to set.
Stopping the Alarm
Top of Page
a. Alarm number
Six alarms can be selected,
including the hourly time
signal.
Check the alarm you want to
set by the alarm number on
the screen.
Normal alarms.
Snooze alarm.
Alerts at the specified
time. Alert repeats
every five minutes,
seven times.
Hourly time signal.
Alerts at 00 minutes
every hour.
WORLDWIDE
to
Alerts at the specified
time. Alert repeats
every five minutes,
seven times.
Hourly time signal.
Alerts at 00 minutes
every hour.
Displaying an alarm
screen:
Press D to cycle between
alarm screens in the
following sequence:
normal alarms
（
through
snooze alarm, hourly time
signal.
2.
Press A to specify the alarm
or hourly time signal
operation.
The operations below can be
specified for each alarm
number.
to
and
: Alarm does
not sound.
: Alarm sounds
only once at
the preset
time.
: Alarm sounds
at the preset
time each day.
: Hourly time
signal does not
sound.
: Hourly time
signal sounds at
00 minutes every
hour.
3.
Hold down C for about two
seconds.
[SET Hold] will appear,
"hour" will flash.
),
Advertisement
Table of Contents
