Table of Contents
Advertisement
Main Menu
Stopwatch
A maximum of 99 hours, 59
minutes, 59.99 seconds can be
measured.
In addition to normal
measurement, you can also
measure lap times and split
times.
Measured results are recorded to
up to 120 memories, so records
can be checked later.
Reference:
Recalling Records - Recall -
【Preparation】
The procedure here is performed
in the Stopwatch Mode. Press B
to switch to the Stopwatch Mode.
See:
Mode
Switching.
(Stopwatch Mode)
WORLDWIDE
Manuals
STB-1000
a. Current time
Main Menu
Measuring Elapsed Time
Measuring Elapsed Time
Measuring Splits
Measuring Laps
a. Hours
b. Minutes
Recalling Records ─
c. Seconds
Recall ─
d. 1/100 seconds
*1 Number of remaining memories
Deleting Memory Data
Shows the current number of memories that
can record.
Laps and Splits
*1 Number of remaining memories
Shows the current number of memories that
can record.
Operation Guide 3423
1.
Use the button operations below to
measure elapsed time.
D
Start
↓
A
Stop
↓
D
Resume
↓
A
Stop
2.
Press A to reset the display.
3.
Press B six times to return to the
Timekeeping Mode.
WORLDWIDE
Note
Manuals
When the number of remaining
STB-1000
memories becomes 0, the oldest record
is deleted and new measurement results
are recorded.
Main Menu
Measuring Splits
Measuring Elapsed Time
Measuring Splits
Measuring Laps
Recalling Records ─ Recall ─
a. Hours
Deleting Memory Data
b. Minutes
c. Seconds
Laps and Splits
d. 1/100 seconds
*1 Number of remaining memories
Shows the current number of memories that
Top of Page
can record.
Privacy Policy
© 2014 CASIO COMPUTER CO., LTD.
1.
Make sure [SP 0H] (split) is displayed.
If [LP 0H] (lap) is displayed, press C
to switch to [SP 0H] (split)
2.
Use the button operations below to
measure elapsed time.
D
Start
Measurement starts.
↓
Terms of Use
1.
Make sure [SP 0H] (split) is displayed.
If [LP 0H] (lap) is displayed, press C
to switch to [SP 0H] (split)
2.
Use the button operations below to
measure elapsed time.
D
Start
Measurement starts.
↓
D
Split 1
The first split time remains on the
display for eight seconds, and then
measurement returns.
↓
D
Split 2
The second split time remains on the
display for eight seconds, and then
measurement returns.
↓
A
Goal
Cumulative time is displayed and
measurement stops.
Press A to reset the display.
3.
4.
Press B six times to return to the
Timekeeping Mode.
WORLDWIDE
Note
Manuals
When the number of remaining
memories becomes 0, the oldest record
STB-1000
is deleted and new measurement results
are recorded.
Main Menu
Measuring Laps
Measuring Elapsed Time
Measuring Splits
Measuring Laps
Recalling Records ─ Recall ─
a. Hours
b. Minutes
c. Seconds
d. 1/100 seconds
*1 Number of remaining memories
Shows the current number of memories that
can record.
1.
Make sure [LP 0H] (lap) is displayed.
Advertisement
Table of Contents
