Tabletop Mounting - 3Com AirConnect 9550 Quick Start Manual

Tabletop Mounting

To install the AP on a flat surface such as a table or desktop, follow these steps:
1
Insert the tabs on the table stand into the slots on the side of the AP, as shown in the
illustration. Align the cable routing cut out toward the upper part of the stand.
2
To lock the stand to the AP, slide the stand back and the AP forward, as shown here:
3
Place the AP and table stand on the table.
4
Connect the Ethernet cable for power and network connection to the LAN port on the back
of the AP.
6
Cable routing cut out