Installation / Removal Of Hd-103 - Konica Minolta IP-421 Service Manual

HOME

Installation / Removal of HD-103

1. Remove the Board cover on the IP-421. (11 screws)
2. Remove the printer relay board. (3 screws), then remove the flash card stopper plate. (2 screws)
3. Connect the HDD to the connector of the printer relay board.
Printer relay board
Caution:
Take care not to bend or break the pins of HDD.
Chapter 2 Disassembly / Assembly
Board cover
Flash card
stopper plate
HDD
Printer relay board
2-7 IP-421 PRINT CONTROLLER