Storage And Transportation - Black & Decker PW 1600 SL Original Instructions Manual

ENGLISH
Sales and Service Centre.
Warning - danger!
Always disconnect the plug from the
power socket before carrying out any
work on the appliance.
Cleaning the nozzle
1) Disconnect the lance from the nozzle.
2) Remove any dirt deposits from the nozzle hole
using the tool (C1).
Cleaning the fi lter
Inspect the inlet fi lter (L) and detergent fi lter (if fi tted)
before each use, and clean in accordance with the
instructions if necessary.
Unjamming the motor (on models with this feature)
In case of lengthy stoppages, limescale sediments
may cause the motor to seize. To unjam the motor,
turn the drive shaft with a tool (M).
Refi lling the oil (for models with this feature)
Add oil through the intake hole to restore the cor-
rect level.
For oil characteristics, refer to the "Technical Data"
table.
End-of-season storage
Treat the appliance with non-corrosive, non-toxic
antifreeze before storing it away for winter.
Put the appliance in a dry place, protected from frost.

STORAGE AND TRANSPORTATION

(FIG. 5)/PAGE 5
Store the accessories as shown in fi g. 5.
Transport the machine as shown in fi g. 5.
12