How to operate the dishwasher
This panel tells you what is
happening in the dishwasher and
can alert you to some possible
Selected wash cycle
Selected dry option
Minutes to end of cycle
Cycle phase, such as WASHING,
RINSING or DRYING
Diagnostic codes to alert you to
Relative energy used by each
cycle. Lets you choose the cycle
you need that uses the least energy.
See Systems Monitor section for
explanation of displays and codes.
Load your dishwasher with dishes,
according to instructions in the
Add detergent to the detergent
Use rinse aid agent to help prevent
spotting. (See How to Use a Rinse
Close and latch dishwasher door.
STEP 3 ~
Select desired wash cycle
Touch the center of the pad.
POTSCRUBBER is for items
such as pots, pans and casseroles.
Everyday dishes may be included.
NORMAL WASH is for loads
of everyday dishes with medium
soils. Designed to yield high
performance on normal loads.
SHORT WASH is for most
loads of everyday dishes with
light soils or soils that have not
dried on. It saves hot water over
the higher performance cycles,
thus saving energy. Pre-rinse
CHINA CRYSTAL is for
lightly soiled china and crystal.
The wash action is softened by
pumping air along with the water
to protect your delicate items.
Pre-rinse dishware before loading.
Follow loading instructions in the
TIME TO END OF CYCLE
partial loads which will be washed
later. Do not use detergent. Do not
use DELAY START with this cycle.
To change a setting, just touch
Your dishwasher is now
including a Soil Option Selection.
Cycle Indicator Lights tell you the
complete program. And a number
in the SYSTEMS MONITOR will
tell you how long the cycle will
t&e. If you're satisfied, just touch
the START pad.
RINSE & HOLD is for rinsing