HOW TO OPERATE YOUR DISHWASHER
Load your dishwasher with dishes, silverware,
pots, pans, bowls, etc. according to instructions
in the Loading section.
TIME TO END OF CYCLE
Systems Monitor z
This panel tells you what is
happening in the dishwasher
and can alert you to some
Selected wash cycle
Selected dry option
Minutes to end of cycle
Cycle phase, such as WASHING,
RINSING or DRYING
Diagnostic codes to alert you to
Relative energy used by
each cycle. Lets you choose
the cycle you need that uses the
See Systems Monitor section for
explanation of displays and codes.
Step 3. Select desired wash cycle. /
Touch the center of the pad.
POTSCRUBBER is for items
such as pots, pans and casseroles.
Everyday dishes may be included.
NORMAL WASH is for loads
of everyday dishes with medium
soils. Designed to yield high
performance on normal loads.
SHORT WASH is for most
loads of everyday dishes with
light soils or soils that have not
dried on. It saves hot water over
the higher performance cycles,
thus saving energy. Pre-rinse
CHINA CRYSTAL is for
lightly soiled china and crystal.
The wash action is softened by
pumping air along with the water
to protect your delicate items. Pre-
rinse dishware b<fore loading.
Follow loading instructions in
the Loading section.
Add detergent to the detergent dispenser.
Use rinse aid agent to help prevent spotting.
(See How to Use a Rinse Agent section.)
Close and latch dishwasher door.
SYSTEMS MONITOR I
RINSE & HOLD is for
rinsing partial loads which will
be washed later. Do not use
START with this cycle.
To change a setting, just touch
Your dishwasher is now
including a Soil Option Selection.
Cycle Indicator Lights tell you the
complete program and a number in
the SYSTEMS MONITOR will
tell you how long the cycle will
take. If you're satisfied, just touch
the START pad.
P O T - N O R M A L S H O R T C H I N A
S C R U B B E R W A S H W A S H C R Y S T A L