Download  Print this page

How To Operate Your Dishwasher - GE GSD1130 Use And Care Manual

Hide thumbs

Advertisement

HOW TO OPERATE YOUR DISHWASHER

STEP 1. Load your dishwasher with dishes, silverware,
pots, pans, bowls, etc., according to the Loading section.
STEP 2. Add detergent to the detergent dispenser.
Make sure the Cycle Indicator Dial is at OFF position
before adding detergent. (See Detergent Guide.)
Use rinse aid agent to help prevent spotting.
Occasionally check to insure that rinse agent
container is at least half full. (See How to Use
a Rinse Agent section. )
STEP 3. Select drying option.
HEATED DRY. Turns the
drying heater on for fast drying.
ENERGY SAVER (No Heat Boost).
Turns the drying heater off to save
energy. Dishes will dry naturally
over a longer period such as overnight.
If you need your dishes sooner, open the dishwasher
door after the cycle is complete to reduce the natural
drying time.
NOTE: The ENERGY SAVER option will also cancel
the WASH HEAT BOOST. To obtain WASH HEAT
BOOST without HEATED DRY, select only the WASH
HEAT BOOST option. (See Energy-Saving Tips.)
STEP 4. WASH HEAT BOOST
Option. See How to Test Water
Temperature section.
The entering water must be
between 120°F. and 140°F.
Use the wash heat boost
option when water is less than 140°F.
When selected, the wash cycle will be extended for21
minutes while the dishwasher heats the water for good
washing and drying.
STEP 5. Select the wash cycle and start the dishwasher.
(See Cycle Selection Hints.)
If your dishwasher drains into a food waste disposer,
operate the disposer until it is empty before starting the
dishwasher.
4
a. Be sure door is unlatched.
b. Push selected cycle button.
c. Push selected option button.
d. Slowly turn Cycle Indicator
e.
I
NOTE: START can be delayed automatically for up
to 6 hours.
a. Be sure door is unlatched.
b. Push selected cycle button.
c. Push selected option button.
d. Slowly turn Cycle Indicator
e. Latch door to start timer.
Cycle Selection Hints
NORMAL WASH—For loads of everyday dishes,
WATER SAVER—For most loads of everyday
RINSE & HOLD—For rinsing partial loads which
Dial to START.
Latch the door to start
the dishwasher. There is a
delay between start-up and water fill so you
time
Dial to desired delay time.
The DELAY START light will come on and
stay on until dishwasher starts. Dishwasher will
start automatically at end of selected delay time.
casseroles with dried-on or baked-on soils. Everyday
dishes may be included.
glasses and cookware with medium soils. Designed
to yield high performance on normal soils.
dishes with light soils or soils that have not dried
on. Also for everyday dishes that have had extra
preparation before loading. It saves hot water over
the higher performance cycles, saving energy.
will be washed later. Do not use detergent. Delay
Start is not recommended for this cycle.
.
WA
\
OFF
RINSING
I
.*
OFF
v
N
"
'
' '
I
RINSING

Hide quick links:

Advertisement

loading