GE GSD2800 Series Use And Care Manual page 8

The SYSTEMS MONITOR tells you if cetiin things are wrong
DISPLAY WHAT IT MEANS
Electrical power to the dishwasher
has been interrupted but is now
and
back on.
RESET
An obstruction is preventing the
lower wash arm from turning.
WASH ARM
This is usually caused by a utensil
sticking through the bottom of the
silverware basket or a pot handle
through the lower rack.
The dishwasher is taking longer
SLOW
than normal to drain the water
DRAIN
out. This is usually caused by a
blockage in the drain air gap (see
Air Gap section), a kink in the drain
hose, or a stopped-up drain pipe.
8
WHAT TO DO
IF DISHWASHER WAS IN USE WHEN THE POWER
FAILURE OCCURRED:
1. Unlatch the door. If the detergent cup is open, add
detergent and close the cup.
2. Relatch the door and touch "START," then immediately
touch "CLEAR RESET." (This will pump any remaining
water out of the machine.)
3. Select the desired cycle and re-run the load.
IF THE DISHWASHER WAS NOT IN USE:
1. Latch door.
2. Select desired cycle.
3. Run cycle when desired.
1. Unlatch door.
2. Check the lower rack for any item that could block the
wash arm and reposition it.
3. Relatch door.
NOTE:
If the wash arm is not blocked and "WASH ARM
by pressing START pad a second time.
This dishwasher is designed to automatically compensate
for longer than normal drain times, but cycle time will be
extended. If this code continues to appear frequently:
1. Clean the air gap (See Air Gap section).
2. Check for a kink in the drain hose.
3. Check plumbing for slow or stopped-up drains.
(NOTE: Warranty service does not cover household
drain problems.)