Sharp AL-2051 Service Manual page 93

Main Sub
Contents
code code
43 05 Fusing temperature setup in
duplex copy
14 Fusing start temperature
setting
[Function]
In the case of duplex copy, the shift temperature set with this simulation is applied to the fusing
temperature.
When this simulation is executed, the current set code number is displayed.
Enter the desired code number and press [ENTER]/[START] key to save the setting.
Code Shift temperature (°C)
0 ±0
1 –8
2 –6
3 –4
4 –2
5 ±0
6 +2
7 +4
8 +6
9 +8
[Operation]
The operation is similar to simulation 26-02.
[Function]
When this simulation is started, the currently set code number is displayed.
Press [Numeric] key or [ ] [
save it to the EEPROM. The machine goes to the sub code entry standby mode.
Code Set temperature (°C)
0 160
1 165
2 170
3 175
4 180
5 185
6 190
7 195
8 200
9 205
10 210
[Operation]
The operation is similar to simulation 43-01.
AL-2051 SIMULATION, TROUBLE CODES 10 - 17
Details of function/operation
Remark
Default
] key to switch the setting, and press [ENTER]/[START] key to
Remark
Default