Sharp AL-2051 Service Manual page 23

8) Click the "Standard" button of the "Connect via the network"
menu.
9) Click the "Printer Driver" button.
To view information on the software, click the "Display
Readme" button.
10) Printers connected to the network are detected. Select the
machine and click the "Next" button.
Note: If the machine is not found, make sure that the machine
is powered on and connected to your computer and then
search again. If the machine is still not found, use the
custom installation procedure to directly specify the IP
address.
11) A confirmation window appears. Check the contents and then
12) Select whether or not you wish the printer to be your default
13) Follow the on-screen instructions.
14) When the installation completed screen appears, click the "OK"
15) Click the "Close" button.
This completes the installation of the software.
• After installation, see "CONFIGURING THE PRINTER DRIVER"
• To install the Printer Status Monitor, see "Installing the printer
(4) Sharing the printer using windows networking
If the machine will be used as a shared printer on a network, follow
these steps to install the printer driver in the client computer.
Note: To configure the appropriate settings in the print server, see
1) Insert the "Software CD-ROM" (Disc 1) into your computer's
2) Click the "start" button, click "My Computer" (
3) Double-click the "setup" icon (
4) The "SOFTWARE LICENSE" window will appear. Make sure
AL-2051 UNPACKING AND INSTALLATION 5 - 6
click the "Next" button.
printer and click the "Next" button.
If you are installing multiple printer drivers, select the printer
that you wish to use as your default printer.
If you do not wish to set either printer driver as the default
printer, select "No".
Note:
If you clicked the "Custom installation" button in step 7), the fol-
lowing windows will appear.
• Printer name window
If you wish to change the printer name, enter the desired
name and click the "Next" button.
• Window confirming installation of the display fonts
To install the display fonts for the PCL printer driver, select
"Yes" and click the "Next" button.
Read the message in the window that appears and click the
"Next" button. Installation begins.
Note:
• If you are using Windows 2000/XP/Server 2003
If a warning message regarding the Windows logo test or dig-
ital signature appears, be sure to click the "Continue Anyway"
or "Yes" button.
• If you are using Windows Vista/7/Server 2008
If a security warning window appears, be sure to click "Install
this driver software anyway".
button.
Note: After the installation, a message prompting you to restart
your computer may appear. In this case, click the "Yes"
button to restart your computer.
to check the printer driver settings.
status monitor".
the operation manual or help file of your operating system.
"Print server" as explained here, is a computer that is directly
connected to the machine, and a "Client" is any other
computer that is connected to the same network.
CD-ROM drive.
double-click the CD-ROM icon (
• In Windows Vista/7, click the "Start" button, click "Computer",
and then double-click the "CD-ROM" icon.
• In Windows 2000, double-click "My Computer" and then dou-
ble-click the CD-ROM icon.
In Windows Vista/7, if a message screen appears asking you
for confirmation, click "Allow".
that you understand the contents of the license agreement, and
then click the "Yes" button.
Note: You can show the "SOFTWARE LICENSE" in a different
language by selecting the desired language from the
language menu. To install the software in the selected
language, continue the installation with that language
selected.
), and then
).
).