Cd Player - RCA RCD113 Manual

CD player

Playing disc
EN
This unit is compatible with audio CD-R/CD-RW
discs.
1. Selects CD from the SELECT switch.
2. Press OPEN
door.
3. Insert a disc with label face up.
4. Push CLOSE to close disc compartment door.
Total number of track on disc can be read
from display.
5. Press PLAY/PAUSE to begin CD playback.
6. Press or
or next track respectively.
7. Press and hold
search quickly current track backward or
forward respectively.
8. Adjust MIN. VOLUME MAX. to your desired
listening level.
9. Press PLAY/PAUSE or STOP to pause or stop
disc playback respectively. To resume
playback, press PLAY/PAUSE again.
Tips:
You may listen through headphones by
inserting one pair into PHONES
Repeating
Press REPEAT once to repeat entire disc and
[REPEAT] icon shows on display.
Press REPEAT twice to repeat current track and
a flashing [REPEAT] icon shows on display.
Press REPEAT a third time to turn off repeat
mode.
Remain/Clock
Press REMAIN/CLOCK to select between
displaying Track time elapse / track time remain.
5
RCD113/15/01 EN
to open disc compartment
to skip to previous
or to
PHONES
PHONES PHONES
PHONES jack. PHONES
7
Shuffling / Mix
Press SHUFFLE / Mix to play tracks randomly
and a dice icon appears on display. Press
again for de-selection.
Programming
When player is in stop mode,
1. Press SET with PROG. and TRACK(flashing,
indicating program position) shows on
display.
2. Press or
want to program.
3. Press SET. again to confirm your selection.
4. Repeat steps 1 to 3 to program to a
maximum of 20 tracks.
5. Press PLAY/PAUSE in program mode to start
program playback (PROG. appears on
display). Otherwise, press STOP to return to
normal playback mode.
Tip:
If you are in normal playback mode but want to
play the saved program. Press SET.
PLAY. PLAY PLAY PLAY PLAY
Clearing program list
Your program will be erased once you open the
disc compartment door or change to another
source mode (e.g. radio, tape).
Displaying the program list
1. While the CD player is stopped, press SET. to
enter program mode.
2. Press SET repeatedly to review the program
list.
6/21/01, 3:50 PM
to select track you
SET. and then SET. SET. SET.