Setting Clock And Sound; Radio - RCA RCD113 Manual

Setting Clock and Sound

Setting Clock
1. Press SET when clock time is shown on
display. Hour digits flash.
2. Press
3. Press SET to shift to minute digits.
4. Press
5. Press SET to confirm settings.
Volume Control
Turn MIN VOLUME MAX. (RCD 113/ RCD115/
TM9136U) to adjust volume.
Press DIGITAL VOLUME (RCD 101 / RCD102
TM9236U) to adjust volume.

Radio

Tuning to a station
1. Select RADIO from the SELECT switch.
2. Press BAND to select between AM and FM
band (MW/LW/FM for Thomson model).
3. Press or
station.
Tips: Tips Tips Tips Tips
Press and hold
than 1 second to automatically tune to the next
station.
4. Adjust MIN. VOLUME MAX. / DIGITAL
VOLUME to your desired listening level
Tips: Tips Tips
Tips Tips
Extend or reposition the antenna for better FM
reception. Move the unit for better AM (MW/
LW for Thomson model reception).
RCD113/15/01 EN
to set the hour.
to set the minute.
to select radio
or for more
6
Boosting Bass
Press DBBS. Press again for de-selection.
Muting audio
• Press MUTE on remote to mute audio and
the indicator will turn on.
• Press MUTE again to exit mute.
Setting presets
1. Press BAND to select between AM/FM(RCA)
or MW/LW/FM (Thomson)bands.
2. Press TRACK TUNE
the desired frequency.
3. Press SET.
4. Press PRES. UP repeatedly to assign
program number.
5. Press SET to confirm.
6. Repeat steps 2 to 5 to preset to a maximum
of 10 channels for FM & AM (MW) band, and 5
channels for LW (Thomson model only)
Using presets
1. Press BAND to select between bands.
2. Press PRES.UP to enter preset mode and
PRESET 1 shows.
3. Press PRES. UP repeatedly to access your
desired preset stations.
PRESET
FM STEREO
6/21/01, 3:49 PM
EN
to access
MHz
4