Download Print this page
RCA RCD200 User Manual

RCA RCD200 User Manual

Rca cd player user manual

Advertisement

Quick Links

5644 166A (EN/E)
user manual
manual de usuario
RCD200
BAND
VOL
AUX IN
EN/E
It is important to read this instruction prior to using your new product for the first time.
Es importante leer este manual antes de usar por vez primera su euipo.
Before you begin
Useful advice
AC power
• Do not use your system immediately
Plug the power supply cord into the AC
after transporting it from a cold place to
power jack on the back of the unit, and into
a warm place, as condensation may cause
an AC power supply outlet that accepts the
the system to malfunction. If moisture
plug supplied with your unit.
forms inside this system, it may not
Battery power
operate properly. To correct the problem,
turn off the power and wait about 30
You can insert 6 D-sized alkaline batteries
minutes for moisture to evaporate.
(not supplied) and you can take your stereo
• This system is fitted with a laser. To avoid
just about anywhere.
accidents, it is to be opened by qualified
• Open the battery compartment door on
technicians only.
the bottom of the unit by pressing down
• Never leave the tray open as dust could
on the tab and pulling out the cover.
cover the laser lens and/or the tray could
• Before inserting the batteries, observe
be bumped into accidentally.
the polarities (that is, + and -) of the
• Do not place the system near wet areas
battery, then relate the polarities to the
such as bathrooms and pool side. Avoid
engraved diagram located on the battery
storing the system at humid places or
compartment door. Insert batteries in the
near abnormally heated areas.
battery compartment.
• Power is continuously supplied to the
system. To disconnect power completely,
Note that the AC line cord must be
unplug the power cord from the power
unplugged from the jack on the back of
outlet.
the unit to operate on batteries.
• Ensure minimum distance around the
apparatus for sufficient ventilation.The
ventilation should not be impeded by
covering the ventilation openings with
items, such as newspaper, etc.
• No naked flame source, such as lighted
candles, should be placed on the
apparatus.
CD playback
Selecting CD mode
Skip and search
When the unit is turned off, press SOURCE
1. Press
or
to skip to the previous or
to turn the unit on. Press SOURCE
next track respectively.
repeatedly to select the CD mode.
2. Press and hold
or
to search
quickly current track backward or
Loading music
forward respectively.
Press the OPEN button to open the disc
Stop playback
compartment door. "– – –" shows on the
display when the door is open. Place a disc
Press
to stop the playback.
on the disc tray with the label side facing up
and then close the door. "– – –" flashes on
Playback mode
the display when disc is being read. The total
In CD / mp3 mode, press MODE repeatedly
number of track/file is then shown on the
to select among:
display.
• REPEAT 1 - Repeats current track/file.
• REPEAT ALL - Repeats the entire disc.
mp3
- Random playback.
When playing an mp3 disc, the display shows
• (No icon) - Normal playback.
the total number of tracks without the
folder structure.
Play and pause
1. In stop mode, press
to begin
playback. The
icon is displayed.
2. During playback, press
to pause
playback. Press again to resume.
The
icon and the current track/file
number are flashing in the pause mode.
FCC information
additional suggestions. Also, the Federal
Communications Commission has prepared a
This device complies with Part 15 of the FCC
helpful booklet, "How To Identify and Resolve
Rules. Operation is subject to the following two
Radio TV Interference Problems." This booklet is
conditions: (1) This device may not cause harmful
available from the U.S. Government Printing
interference, and (2) this device must accept any
Office, Washington, DC 20402. Please specify
interference received, including interference
stock number 004-000-00345-4 when ordering
that may cause undesired operation.
copies.
In accordance with FCC requirements, changes or
This product complies with DHHS Rules 21 CFR
modifications not expressly approved by
subchapter J. Applicable at the date of
Thomson Inc. could void the user's authority to
manufacture.
operate this product. This device generates and
uses radio frequency (RF) energy, and if not
For your records
installed and used properly, this equipment may
In the event that service should be required, you
cause interference to radio and television
may need the model number and the serial
reception.
number. In the space below, record the date and
If this equipment does cause interference to
place of purchase and the serial number:
radio or television reception (which you can
Model No.:
determine by unplugging the unit), try to correct
Date of Purchase:
the interference by one or more of the following
Place of Purchase:
measures:
Serial No.:
Re-orient the receiving antenna (that is, the
antenna for the radio or television that is
CAUTION
RISK OF ELECTRIC SHOCK
"receiving" the interference).
DO NOT OPEN
Move the unit away from the equipment
T H E
L I G H T N I N G
CAUTION: TO REDUCE THE
THE EXCLAMATION
FLASH AND ARROW-
RISK OF ELECTRIC SHOCK,
POINT WITHIN THE
that is receiving interference.
HEAD WITHIN THE
D O N O T R E M O V E C O V E R
T R I A N G L E I S A
T R I A N G L E I S
A
( O R B A C K ) . N O U S E R -
WARNING
SIGN
Plug the unit into a different wall outlet so
W A R N I N G
S I G N
S E RV I C E A B L E PA R T S I N -
ALERTING YOU OF
ALERTING YOU OF
S I D E . R E F E R S E RV I C I N G
I M P O R T A N T
that the unit and the equipment receiving
" D A N G E R O U S
T O Q U A L I F I E D S E R V I C E
I N S T R U C T I O N S
VOLTAGE" INSIDE
A C C O M PA N Y I N G
interference are on different branch circuits.
PERSONNEL.
THE PRODUCT.
T H E
P R O D U C T.
If these measures do not eliminate the
SEE MARKING ON BOTTOM / BACK OF PRODUCT
interference, please consult your dealer or an
WARNING:
TO PREVENT FIRE OR ELECTRICAL
experienced radio/television technician for
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
AUDIO AND COMMUNICATIONS DIVISION PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONS
Some of the following information may not apply to
Do not expose product to rain and do not use
your particular product; however, as with any
near water; such as, sink, wet basement,
electronic product, precautions should be observed
swimming pools, etc.
during handling and use.
Always leave sufficient space around the product
Before using the product, please follow and
for ventilation. Do not place product in or on a
adhere to all warnings, safety and operating
bed, rug, bookcase or cabinet that may prevent
instructions located on the product and in the
air flow through vent openings.
user book. Save all instructions for future
reference.
Before you begin
Headset safety
Important battery
information
• Have a Blast-Just Not in your
eardrums!
• Remove the batteries to avoid leakage if
Make sure you turn down
you do not use your system for more
the volume on the unit
than one month.
before you put on headphones.
• Discard leaky batteries immediately as
Increase the volume to the desired level
leaking batteries may cause skin burns or
only after headphone are in place.
other personal injuries. Dispose of
• Do not play your headset at high volume.
batteries in the proper manner,
Hearing experts warn against extended
according to provincial and local
GEFAHR EINES
high-volume play.
ELEKTRISCHEN SCHLAGS
regulations.
• If you experience ringing in your ears,
• Any battery may leak electrolyte under
reduce volume or discontinue use.
the following circumstances:
• You should use with extreme caution or
- if mixed with a different battery type,
temporarily discontinue use in potentially
- if inserted incorrectly,
hazardous situations.
- if all batteries are not replaced at the
• Even if your headset is an open-air
same time,
designed to let you to hear outside
- if disposed of in fire, or
sounds, do not turn up the volume so
- if an attempt is made to charge a
high that you are unable to hear what is
battery not intended to be recharged
around you.
• Be sure to remove batteries when storing
the set for more than 30 days. Leaky
Don't infringe
batteries can badly damage the system.
Be sure to dispose of leaky, weak or dead
This product should only be used for the
batteries properly according to federal,
purposes for which it is sold, that is,
entertainment, violating no copyright law.
state, and local regulations. To prevent
Any attempts to use this product for
injury or damage, do not reverse
unintended purposes are unlawful and
batteries and do not mix battery type.
therefore not condoned by Thomson.
CD playback
Creating programs
Displaying and editing
program list
• The unit can program up to
• Press PROGRAM repeatedly to recall and
display the program.
64 normal audio CD tracks and
• While track number is displayed, press
64 mp3 tracks.
or
to edit the track number. Press
• Folder program is not
PROGRAM to store the newly selected
supported by this unit.
track.
1. In the CD stop mode, press PROGRAM to
Deleting program list
enter the program mode.
Opening the CD compartment door or
The PROGRAM icon shows on the display
switching mode will delete all the stored
with "P01" (first program location) and
"000" (for selecting track/file number)
tracks.
flash on the display.
2. Press
or
to select the track to be
stored.
3. Press PROGRAM to store the selected
track.
4. Repeat step 2 and 3 to continue
programming.
5. Press
in the program mode to start
the program playback.
Press
to exit the program creating
mode.
The unit remains in program mode once
programming track is done.
In the program mode, random playback
mode cannot be selected.
Do not expose product to extreme temperatures
damaged; or
such as found near a hot radiator or stove, or in a
B. Objects have fallen, or liquid has been spilled
car parked in the Summer sun.
into the product; or
Connect power cord only to AC power source as
C. The product has been exposed to rain; or
marked on the product.
D. The product does not appear to operate
Some products employ a polarized AC line plug
normally or exhibits a marked change in
(one blade is wider). This is a safety feature. The
performance; or
plug will go in the power outlet only one way. If
E. The product has been dropped, or the cabinet
the plug doesn't go into the outlet completely,
damaged.
turn the plug over and put it in the other way. If
When service or repairs are completed, ask the
it still doesn't fit, contact a qualified electrician to
service technician to perform the safety check
change the outlet. Do not defeat the safety
described in the service manual and to confirm
purpose of the polarized plug.
that replacement parts have the same safety
Route power cord to prevent it from being
characteristics as the original parts.
Overloading - Do not overload the wall outlets,
pinched, or walked on, or melted by a hot stove
or radiator.
extension cords or integral convenience
receptacles as this can result in a risk of fire or
To clean cabinet, unplug AC power cord, then use
electric shock.
a soft cloth dampened only with water.
IF YOUR PRODUCT OPERATES ON BATTERIES,
Do not place lighted candles, cigarettes, cigars,
adhere to the following precautions:
etc. on the product.
A. Any battery may leak electrolyte if mixed with
Unplug AC power cord from outlet during a
a different battery type, if inserted incorrectly, or
lightning storm or when product is left unused
if all batteries are not replaced at the same time.
for a long period of time to prevent damage due
B. Any battery may leak electrolyte or explode if
to lightning or power line surges.
disposed of in fire or an attempt is made to
Care should be taken so that objects do not fall
charge a battery not intended to be recharged.
and liquids do not spill into the product.
C. Discard leaky batteries immediately. Leaking
Never add accessories that the product has not
batteries can cause skin burns or other personal
been designed to accommodate.
injury.When discarding batteries, be sure to
Use only the manufacturer's approved mounting
dispose of them in the proper manner, according
instructions and hardware when installing
to provincial and local regulations.
product.
IF YOUR PRODUCT IS EQUIPPED WITH
Do not attempt to disassemble the cabinet. This
ANTENNA TERMINALS, and if an outdoor
product does not contain customer serviceable
antenna is connected, be sure the system is
components.
grounded so as to provide some protection
Do not handle the unit or power cord when your
against voltage surge and built-up static charges.
hands are wet or damp.
An outdoor antenna should be locate away from
Carts and Stands — The appliance
power lines.
should be used only with a cart or
IF PRODUCT IS TO BE CONNECTED TO A CATV
stand that is recommended by the
SYSTEM, call the CATV system installer's
manufacturer.
attention to Article 820-40 of the NEC that
An appliance and cart combination
provides guidelines for proper grounding and, in
should be moved with care. Quick stops, excessive
particular, specifies that the cable ground shall be
force, and uneven surfaces may cause the
connected to the grounding system of the
appliance and cart combination to overturn.
building, as close to the point of cable entry as
Damage Requiring Service–This product should
practical.
be serviced by qualified service personnel when:
A. The power supply cord or the plug has been
General controls
Display
Top view
SOURCE To select among the radio, CD,
AUX IN and power off modes.
To go to the previous track/file or search
AUX
backward. To tune down frequency in the
radio mode.
To go to the next track/file or search
forward. To tune up frequency in the radio
mode.
To start and pause the playback.
To stop the playback.
OPEN Press to open the disc compartment
1. Sound equalizer modes
door.
2. Audio-in mode selected
3. Program mode activated
Front view
4. Repeat mode
BAND To select the radio band.
5. Disc contains mp3 files
DBBS To switch on or off the bass boost.
6. DBBS mode activated
To select among Rock, Jazz, Pop, Classic
7. Random mode
and equalizier off modes.
8. Playback in progress
VOL To adjust the volume.
9. Radio frequency unit
PRESET UP / PRESET DN To select the radio
10. Radio band
preset stations.
11. Displays track/file number, volume level,
PROGRAM To enter the program mode and
radio frequency, preset station number
confirm the program settings. To set the
and program location number during
radio preset channels in the radio mode.
corresponding operations.
MODE To select among the repeat current
track/file, repeat all tracks/files and random
playback modes.
AUX IN To connect an audio cable for
external audio input. Select AUX IN mode by
pressing SOURCE.
To connect the headphones.
Troubleshooting tips
System doesn't turn on
CD sound skips
• Unplug the unit for a moment, and then
• Clean the CD (as explained in
plug it back in.
"Maintenance")
• Check the outlet by plugging in another
• Check CD for warping, scratches, or other
device
damage
No sound
Cannot play mp3 files
• Adjust volume setting.
• Make sure files are saved under .mp3
• Make sure you've selected the correct
extension. e.g. Rocky08.mp3
function
• Check that the recorded bit rate is within
• Make sure headphones are not plugged
32kbps and 320kbps.
in.
• Make sure the files are in MPEG 1/2 layer
3 format.
Poor radio reception
• Adjust the antenna for better reception
• Try turning off electrical appliances near
the unit, such as hair dryers, vacuum
cleaners, or fluorescent lights
CD doesn't play
• Make sure you've put a CD in the tray
• Make sure the CD's label is facing up
• Try another CD
• Make sure that Pause mode is not
activated
• Make sure CD function is selected
ESD remark:
In case of misfunction due to electrostatic discharge just reset the product (disconnect and
reconnect of the power source may be required) to resume normal operation.
English
Important information
For your safety
Technical information
The AC power plug is polarized
Product: Portable CD radio
(one blade is wider than the
Brand: RCA
other) and only fits into AC
Model: RCD200
power outlets one way. If the
plug will not go into the outlet
Electrical consumption
completely, turn the plug over and try to insert
it the other way. If it still does not fit, contact a
Power Supply: 120V ~ 60Hz
qualified electrician to change the outlet, or use
Power Consumption: 15 Watts
a different one. Do not attempt to bypass this
safety feature.
IMPORTER
Comercializadora Thomson de México, S.A.
CAUTION: TO PREVENT ELECTRIC SHOCK,
de C.V.
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
Service information
C.P. 06700. México, D.F.
This product should be serviced only by those
Telefono: 52-55-11-020360
specially trained in appropriate servicing
RFC: CTM-980723-KS5
techniques. For instructions on how to obtain
service, refer to the warranty included in this
EXPORTER
Guide.
Thomson Inc.
P.O. Box 1976
Indianapolis, IN 46206 - 1976
©2007 Thomson Inc.
Trademark(s) ® Registered
Marque(s) ® Deposée(s)
Marca(s) ® Registrada(s)
www.rcaaudiovideo.com
Printed in China / Impreso en China
Special features
mp3 playback
Bass boost system
This player can play mp3 files stored on a
Press DBBS to turn the digital bass boost
CD.
system on and off.
Sound equalizer
Notes on CD-R/RW
Press
to select among the different
• Do not affix any type of
sound effects (Rock, Jazz, Pop, Classic and
labels to either side (recordable
sound equalizer off).
or labeled side) of a CD-R/RW
disc as this may result in the unit
Auxiliary input
malfunctioning.
Sound from an external player (e.g. mp3
• To avoid damages to the CD-R/RW
player) can be played from this unit. Connect
disc, do not open the disc
an audio cable (not included) to the AUX IN
compartment door while the disc is
jack on the front of the unit. Connect the
being read.
other end of the cable to the external player.
• Do not load an unrecorded CD-R/RW
Select the AUX IN mode by pressing SOURCE
disc into the unit. This may take a
repeatedly until "AUX" shows on the
longer time to read the disc.
display.
• Playback capability for CD-RW discs
may vary due to variations in the
Adjust volume by pressing VOL+/–. Control
quality of the CD-RW disc and the
other playback operations on the external
recorder used to create the disc.
player.
Maintenance
Cleaning the exterior
• Do not use record cleaning sprays or
antistatic agents on CDs. Also, never
• Disconnect the system from AC power
clean CDs with benzene, thinner, or other
before cleaning the exterior of the unit
volatile solvents which may cause
with a soft dust cloth
damage to disc surface.
• Clean the exterior with a soft clean cloth
or slightly moistened chamois leather.
DO NOT use solvents as it may cause
CD Lens Care
damage to the unit.
• When your CD lens gets dirty it can also
cause the system to output poor sound
Handling CDs
quality. To clean the lens you will need to
• Do not touch the signal surfaces. Hold
purchase a CD lens cleaner which can
maintain the output sound quality of
CDs by the edges, or by one edge and
your system. For instructions on cleaning
the hole.
the CD lens, refer to the ones
• Do not affix labels or adhesive tapes to
accompanying the lens cleaner.
the label surfaces. Do not scratch or
damage the label.
Technical Specification
• CDs rotate at high speeds inside the
player. Do not use damaged (cracked or
Power supply: 120V~60Hz
warped) CDs
Dimensions ( H x W x D mm):
• Make sure CDs are stored in their
Unit size - 152 x 360 x 270
original case after use. Keep them away
Weight: 2.15kg
from damp, humid or abnormally heated
CD player: Response curve (+/- 2dB):
places.
60Hz to 20 kHz
Rating Plate: Look for it at the bottom of the
Cleaning CDs
set.
• Dirty CDs can cause poor sound quality.
Always keep CDs clean by wiping them
The descriptions and characteristics in this owner's
gently with a soft cloth from the inner
manual are for the purpose of general reference only
and not as a guarantee. In order to provide you with
edge toward the outer perimeter.
the highest quality product, we may make changes or
• If a CD becomes dirty, wet a soft cloth in
modifications without prior notice. The English
water, wring it out well, wipe the dirt
version serves as the final reference on all product
away gently, and then remove any water
and operational details should any discrepancies arise
in other languages.
drops with a dry cloth.
Important information
Safety precautions
• The apparatus should not be exposed to
• Never open the cabinet under any
dripping or splashing and no objects
circumstances. Any repairs or internal
filled with liquids, such as vases, should
adjustments should be made only by a
be placed on the apparatus.
trained technician.
• No naked flame sources, such as lighted
• Never operate this product with the
candles, should be placed on the
cabinet removed.
apparatus.
• Do not use your System immediately
• Attention should be drawn to the
after transporting it from a cold place to
environmental aspects of battery
disposal.
a warm place, as condensation may cause
• Minimum distances should be kept
the system to malfunction.
• Keep your unit away from humid areas
around the apparatus for sufficient
and abnormally hot places.
ventilation.
• Do not touch the player with wet hands.
If any liquid enters the player cabinet,
take the player to a trained technician
for inspection.
• This compact disc player uses a laser to
read the music on the disc. The laser
mechanism corresponds to the cartridge
and stylus of a record player. Although
this product incorporates a laser pick-up
lens, it is completely safe when operated
according to directions.
• Discs rotate at high speed inside the
player. Do not use damaged, warped, or
cracked discs.
• The ventilation should not be impeded
• Do not touch the pick-up lens which is
by covering the ventilation opening with
located inside the disc compartment. To
keep dust from collecting on the pick-up
items, such as newspaper, table-cloths,
lens, do not leave the compartment door
curtains, etc.
open for an extended period of time. If
• The rating plate is located at the bottom
the lens becomes dirty, clean it with a
cabinet of apparatus.
soft brush, or use an air blower brush
designed for camera lenses.
Radio
Select radio mode
Setting preset stations
When the unit is turned off, press SOURCE
1. In the radio mode, press BAND to select a
to turn the unit on. Press SOURCE
radio band.
repeatedly to select radio mode.
2. Press
or
to select the station to be
saved as a preset station.
Select radio band
3. Press PROGRAM.
4. Press PRESET UP or PRESET DN
Press BAND to select FM or AM band.
repeatedly to assign a preset station
number.
5. Press PROGRAM to confirm.
Extend or reposition the
6. Repeat steps 2 to 5 to set additional preset
antenna for better FM
stations.
reception. Rotate the unit for
• There are 20 preset locations for FM and
better AM reception.
12 preset locations for AM on this unit.
Using Presets
Tuning to a station
1. Press BAND to select a radio band.
• Press
to tune down radio frequency.
2. Press PRESET UP or PRESET DOWN
• Press
to tune up radio frequency.
repeatedly to access the desired preset
• Press and hold
or
to
stations.
automatically tune to the next station.
U.S. Limited Warranty
Acts of nature, such as but not limited to
lightning damage.
What your warranty covers:
Product Registration:
Defects in materials or workmanship.
Please complete and mail the Product
For how long after your purchase:
registration Card packed with your unit. It
90 days from date of purchase - unit
will make it easier to contact you should it
exchange, which includes parts and labor.
ever be necessary. The return of the card is
91 days to 1 year from date of purchase -
not required for warranty coverage.
unit exchange, which includes parts only;
Limitation of Warranty:
you pay the labor.
THE WARRANTY STATED ABOVE IS THE
What we will do:
ONLY WARRANTY APPLICABLE TO THIS
Provide you with a new, or at our option, a
PRODUCT. ALL OTHER WARRANTIES,
refurbished unit. The exchange unit is
EXPRESS OR IMPLIED (INCLUDING ALL
under warranty for the remainder of the
IMPLIED WARRANTIES OF
original product's warranty period.
MERCHANTABILITY OR FITNESS FOR A
Proof of purchase in the form of a bill of
PARTICULAR PURPOSE) ARE HEREBY
sale or receipted invoice which is evidence
DISCLAIMED. NO VERBAL OR WRITTEN
that the product is within the warranty
INFORMATION GIVEN BY THOMSON INC.,
period must be presented to obtain
ITS AGENTS OR EMPLOYEES SHALL CREATE
warranty service. For rental firms, proof of
A GUARANTY OR IN ANY WAY INCREASE
first rental is also required.
THE SCOPE OF THIS WARRANTY.
How to make a warranty claim:
REPAIR OR REPLACEMENT AS PROVIDED
Properly pack your unit. Include any cables,
UNDER THIS WARRANTY IS THE EXCLUSIVE
etc., which were originally provided with
REMEDY OF THE CONSUMER. THOMSON
the product. We recommend using the
INC. SHALL NOT BE LIABLE FOR INCIDENTAL
original carton and packing materials.
OR CONSEQUENTIAL DAMAGES RESULTING
Include evidence of purchase date such as
FROM THE USE OF THIS PRODUCT OR
the bill of sale. Also print your name and
ARISING OUT OF ANY BREACH OF ANY
address and a description of the defect.
EXPRESS OR IMPLIED WARRANTY ON THIS
Send via standard UPS or its equivalent to:
PRODUCT. THIS DISCLAIMER OF
Thomson Inc.,
WARRANTIES AND LIMITED WARRANTY ARE
Product Exchange Center,
GOVERNED BY THE LAWS OF THE STATE OF
11721 B Alameda Avenue,
INDIANA. EXCEPT TO THE EXTENT
Socorro, Texas 79927
PROHIBITED BY APPLICABLE LAW, ANY
Insure your shipment for of loss or damage.
IMPLIED WARRANTY OF MERCHANTABILITY
Thomson accepts no liability in case of
OR FITNESS FOR A PARTICULAR PURPOSE
damage or loss en route to Thomson.
ON THIS PRODUCT IS LIMITED TO THE
Pay any charges billed to you by the
APPLICABLE WARRANTY PERIOD SET FORTH
Exchange Center for service not covered by
ABOVE.
the warranty.
How state law relates to this warranty:
A new or refurbished unit will be shipped
Some states do not allow the exclusion nor
to you freight prepaid.
limitation of incidental or consequential
What your warranty does not cover:
damages, or limitations on how long an
Customer instruction. (Your Owner's Manual
implied warranty lasts, so the above
provides information regarding operating
limitations or exclusions may not apply to
Instructions and user controls. For
you.
additional information, ask your dealer.)
This warranty gives you specific legal rights,
Installation and set-up service adjustments.
and you also may have other rights that
Batteries.
vary from state to state.
Damage from misuse or neglect.
If you purchased your product outside the
Products which have been modified or
USA:
incorporated into other products.
This warranty does not apply. Contact your
Products purchased or serviced outside the
dealer for warranty information.
USA.

Advertisement

loading