Hinge "C" Arm; Door Seal Retainer - Electrolux 5000 Series Service Manual

SERVICE & DISASSEMBLY

HINGE "C" ARM

1. Remove dishwasher cabinet. See CABINET REMOVAL for
detailed instructions.
2. Remove door spring. See previous section for detailed
instructions.
3. Remove two screws that attach inner door panel to hinge.
4. Remove hinge retainer from hinge pin. Then remove hinge. (See
Figure 39)
5. Replace hinge and install a new hinge retainer.
6. Reverse order procedure to complete assembly.

DOOR SEAL RETAINER

1. Remove dishwasher cabinet. See Cabinet Removal for detailed instructions.
2. Place dishwasher in an upright position and remove door seal. See previous
section for detailed directions.
3. Remove screws (across the top and on both sides of the unit) that mount
door seal retainer to tub.
4. Make sure the retainer gasket is in place and not torn before reinstalling the
retainer.
5. Reverse order to complete assembly.
29
Hinge
Retainer
Figure 39