Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence.
Control panel Setting mode First use Set the water softener Setting manually Setting electronically Use of dishwasher salt Use of rinse aid Adjusting the dosage of rinse aid Daily use Loading cutlery and dishes The lower basket The cutlery basket...
Page 4
Contents Cleaning the filters Cleaning the spray arms External cleaning Internal cleaning Prolonged periods of non-operation Frost precautions Moving the machine What to do if ... Technical data Hints for test institutes Installation instructions Installation Fitting under a counter (kitchen worktop or sink) Levelling Water supply connections Water outlet hose connection...
• Avoid opening the door whilst the appliance is in operation, hot steam may escape. • Do not take any dishes out of the dishwasher before the end of the dishwashing cycle. • After use, isolate the appliance from the power supply and turn off the water supply.
• The water in your dishwasher is not for drinking. Detergent residues may still be present in your machine. • Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves.
WARNING! For electrical and water connection carefully follow the instructions given in specific paragraphs. Product description Upper basket Water hardness dial Salt container Detergent dispenser Rinse aid dispenser Rating plate Filters Lower spray arm Upper spray arm Product description...
Control panel Worktop Control panel On/off button Programme selection buttons Delay start button Indicator lights Digital display Function buttons Programme in progress Indicator lights Illuminates when a washing programme is set and remains illuminated for all the duration of the washing programme.
End of programme MULTITAB Salt Rinse aid 1) The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and/or rinse aid is necessary. Function buttons In addition to the programme selection, the setting of the water softener and the activation/deactivation of the rinse aid dispenser can also be set with the help of these buttons.
• Remove all packaging from inside the appliance • Set the water softener • Pour 1 litre of water inside the salt container and then fill with dishwasher salt • Fill the rinse aid dispenser If you want to use combi detergent tablets such as: "3 in 1", "4 in 1", "5 in 1" etc...
Setting electronically The dishwasher is factory set at level 5. 1. Press the On/Off button. The dishwasher must be in setting mode. 2. Press simultaneously and keep pressed buttons B and C, until the lights of buttons A, B and C start flashing.
Examples: if the current level is 5, by pressing button A once, level 6 is selected. if the current level is 10, by pressing button A once, level 1 is selected. 5. To memorise the operation, switch off the dishwasher by pressing the On/Off button.
WARNING! Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher clean- ing agent, liquid detergent). This would damage the appliance. Rinse aid ensures thorough rinsing, and spot and streak free drying.
Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades. Daily use • Check if it's necessary to refill with dishwasher salt or rinse aid. • Load cutlery and dishes into the dishwasher.
• Fill with dishwasher detergent. • Select a wash programme suitable for the cutlery and dishes. • Start the wash programme. Loading cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.
Loading cutlery and dishes For washing in the dishwasher the following cutlery and dishes are not suitable: • Cutlery with wooden, horn, china or mother- of-pearls handles. • Plastic items that are not heat resistant. • Older cutlery with glued parts that are not temperature resistant.
Loading cutlery and dishes To make it easier to load larger dishes, the 2 plate racks on the right in the lower basket can be folded down. The cutlery basket WARNING! Long bladed knives stored in an upright position are a potential hazard. Long and/ or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket.
Loading cutlery and dishes 2. Place forks and spoon in the cutlery basket with their handles pointing downwards. For larger utensils, such as whisks, leave off one half of the cutlery grid. The upper basket Load smaller, fragile crockery and long, sharp cutlery in the upper basket.
Use of detergent Only use detergents specifically designed for use in dishwashers. Please observe the manufacturer's dosing and storage recommendations as stated on the detergent packaging. Using no more than the correct amount of detergent contributes to reducing pol- lution. Fill with detergent 1.
4. When using detergent tablets, place the tablet in compartment (1) 5. Close the lid and press until it locks in place. Detergent tablets Detergent tablets from different manu- factures dissolve at different rates. For this reason, some detergent tablets do not at- tain their full cleaning power during short washing programmes.
4. To change the setting, press button B again until the end of programme indi- cator light turns off. 5. To memorise the operation, switch off the dishwasher by pressing the On/Off button. If you decide to turn back to the use of standard detergent system we advise that you: 1.
2) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.
Page 23
Cancelling the "delay start" and / or a washing programme • To cancel a delay start in progress you have to reset the dishwasher. • Cancelling a delay start involves also the cancelling of the washing programme set.
• Empty the lower basket first and then the upper one; this will avoid water drip- ping from the upper basket onto the dishes in the lower one. • Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.
Page 25
Before cleaning the filters ensure that the machine is switched off. 1. Open the door, remove the lower basket. 2. The dishwasher filter system compri- ses a coarse filter (A), a microfilter (B) and a flat filter. Unlock the filter system using the handle on the mi- crofilter, and remove the filter system.
Care and cleaning WARNING! NEVER use the dishwasher without filters. Incorrect repositioning and fitting of the filters will produce poor washing results and may result in damage to the appliance. Cleaning the spray arms NEVER try to remove the spray arms.
Avoid over tilting the machine during transportation. What to do if ... The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer.
Page 28
S.N. : ......Possible cause and solution • The dishwasher’s door has not been properly closed. Close the door.
• The detergent may be the cause. Contact the detergent manufacturer’s consumer care line. Width - height - depth (cm) Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher's door Minimum - Maximum (MPa) Place settings Technical data...
Hints for test institutes Hints for test institutes Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes"). Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes").
Page 31
Hints for test institutes Lower basket with cutlery basket Cutlery basket 1) If there are cup racks in place on the lefthand side, remove them.
Installation Installation instructions Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Fitting under a counter (kitchen worktop or sink) By removing the machine's worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to...
The water inlet hose must not be kinked, crushed, or entangled when it is being connected. The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut.
(maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher. Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.
If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We therefore advise you to remove it. Electrical connection WARNING! Safety standards require the appliance to be earthed.
Environment concerns Environment concerns Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities.
Need help?
Do you have a question about the F50674 and is the answer not in the manual?
Questions and answers