Service & Disassembly; Safety Precautions; Door Panel - Electrolux 5000 Series Service Manual

SERVICE & DISASSEMBLY

SAFETY PRECAUTIONS

Always turn off the electric power supply before servicing electrical components,
testing with an ohmmeter, or replacing parts. Refer to Safe Servicing Procedures
at the front of this manual before servicing the dishwasher.
All voltage checks should be made with a voltmeter having a full scale range of 130
volts or higher.
After service is completed, be sure all safety-grounding circuits are complete, all
electrical connections are secure, and all access panels are in place.
If the repair on this product requires the removal of door panel, liner, or the cabinet,
you may find exposed sharp edges. Care must be taken to avoid injury while
working with exposed sharp edges. It is highly recommended that protective
clothing and gloves are worn while performing service to this product.

DOOR PANEL

In order to access the electronic controls, the outer door panel must be removed
from the door assembly.
1. Disconnect power from dishwasher.
2. The outer door panel is mounted to the inner door
panel by Phillips head screws (Figure 22).
3. Removing the outer door panel will expose sharp
edges on the inner door panel.
4. Be sure to support outer door as screws are removed
to prevent damage to outer panel and dishwasher.
5. Remove wiring harness from control and ground
connection on door panel.
6. The outer door panel is disconnected.
21
Figure 22