Table of Contents
Advertisement
GS-SR113 System Installation Guide
Figure 19
Figure 19 indicates the airflow duct should be flat and
completely placed into the system. When the upper case is placed,
please be aware that the power supply header and the
motherboard should be completely placed under the duct cover.
Otherwise the upper case might not be able to close tightly.
5.7. Reinstall Top Cover
When complete the installation of the entire essential components
(from subsection 5.1 to 5.6), replace the plastic air duct. This will
secure the airflow is inside the chassis. Failure to do so may
cause CPU and Memory over heating.
Replace top cover, insuring that the thumbscrews are tightened.
(Fig-20)
19
Advertisement
Table of Contents
