Table of Contents
Advertisement
Viewing the Configuration Status Per Single WAN Port
"
To view the configuration status of a single WAN port
•
Type 3 at the WAN Ports Configuration menu. Configuration information for WAN
ports may differ depending on the type of port. Following is one example of a single
WAN port configuration screen:
********************************************************
********************************************************
Port Num: 1
Port Status: enabled
Physical Interface: V35
DCE/DTE:
Dialing Protocol:
Terminal Adapter type: z200
********************************************************
The following information is displayed for the WAN port:
Port Number – the number of the LAN port.
Port Status – the status of the LAN port. It may be either "enabled" or "disabled."
Physical Interface – type of physical interface used for the port.
DCE/DTE – displays whether the WAN line is configured for DCE or DTE mode.
Dialing Protocol – the protocol used for dialing.
Terminal Adapter Type – The type of terminal adapter.
To continue to the next item, type n.
To return to the previous item, type p.
To exit to the previous menu, type e.
Viewing the VIU-323 Calls Status
"
To view the VIU-323 Calls Status
•
Type 4 in the Remote Diagnostic Main Menu.
Configuration status per single WAN port
DCE
RS366
Advanced Procedures
8-9
Advertisement
Table of Contents
