Table of Contents
Advertisement
MIB Version – displays the SNMP proprietary RADVision MIB version used by the unit.
Modifying the Password
After using the default password to access the VIU-323, we recommend that you change the
password.
"
To change the configuration access password
1. In the Configuration Source screen, click Change Password. The Change Password
screen is displayed.
Figure 9 - Change Password screen
3. In the Old Password text box, type your current password (if this is the default
password, type VIUrv).
4. In the New Password text box, type the new password (16 characters maximum).
5. In the Confirm New Password text box, type the new password again for verification.
6. Click OK to confirm. You return to the Configuration Source screen.
The next time you access the configuration of this VIU-323, type your new password in the
Enter Password screen.
Note: If you do not remember the old password, please contact your RADVision
representative or technical support at support@radvision.com and
support@tlv.radvision.com.
Selecting the VIU-323 for Configuration
5-5
Advertisement
Table of Contents
