Advanced Procedures
Prerequisites
Before you begin, decide whether you will be accessing the diagnostic utility locally or from
a remote location.
If you are accessing the diagnostic utility locally, verify that:
!
You have connected the VIU-323's console port to a PC with the appropriate cable.
!
You have standard terminal emulator software, such as HyperTerminal, installed on
the PC.
If you are accessing the diagnostic menus from a remote location, verify that:
!
You have connected an external modem to the remote VIU-323's console port.
!
You have configured the modem properly.
!
You have prepared a PC with a modem running standard terminal emulator software
with a dial-up connection to the VIU-323.
Creating a Dial-Up Connection to the VIU-323
Refer to your terminal emulator on-line help or documentation for instructions on creating a
new dial-up connection.
Create a new dial-up connection with the following parameters:
!
The phone number of the remote VIU-323.
!
The following modem settings:
Baud rate
Data bits
Parity
Flow control
8-2
9600
8
none
none