Packing Instructions - McIntosh MA6600 Owner's Manual

Mcintosh integrated amplifier owner's manual
Hide thumbs Also See for MA6600:
Table of Contents

Advertisement

Packing Instructions

In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below. It is very important that the four plastic feet are
attached to the bottom of the equipment. Two #10 x 2-1/2
inch screws and washers must be used to fasten the unit
securely to the bottom pad and wood skid. This will ensure
the proper equipment location on the bottom pad. Failure
to do this will result in shipping damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please
call or write Customer Service Department of McIntosh
Laboratory. Refer to page 3. Please see the Part List for the
correct part numbers.
Quantity
Part Number
1
033888
4
033887
1
033697
1
033725
1
034301
1
033699
2
017218
2
401204
2
404033
4
017937
4
400159
4
404080
Packing Instructions
Description
Shipping carton
End Cap
Inner carton
Top pad
Bottom pad
Wood skid
Plastic foot (spacer)
#10 x 2-1/2 inch wood screw
#10 flat washer 1-3/4 inch
Plastic foot
#10-32 x 3/4 machine screw
#10 flat washer
23

Advertisement

Table of Contents
loading

Table of Contents