General Specifications; Packing Instructions - McIntosh MA8950 Owner's Manual

General Specifications

Power Requirements
Field AC Voltage conversion of the MA8950 is not
possible. The MA8950 is factory configured for one
of the following AC Voltages:
100 Volts, 50/60Hz at 5.2 amps
110 Volts, 50/60Hz at 4.4 amps
120 Volts, 50/60Hz at 4.4 amps
220 Volts, 50/60Hz at 2.45 amps
230 Volts, 50/60Hz at 2.35 amps
240 Volts, 50/60Hz at 2.25 amps
Standby: Less than 0.25 watt
Note: Refer to the rear panel of the MA8950 for the cor-
rect voltage.
Overall Dimensions
Width is 17-1/2 inches (44.45cm)
Height is 7-5/8 inches (19.37cm) including feet
Depth is 18-3/4 inches (47.63cm) including the Front
Panel and Knobs
Weight
75 pounds (34.1 kg) net, 93 pounds (42.3 kg) in ship-
ping carton
Shipping Carton Dimensions
Width is 29-1/2 inches (74.93cm)
Depth is 29 inches (73.66cm)
Height is 17 inches (43.18cm)

Packing Instructions

In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as
shown below. It is very important that the four plastic
feet are attached to the bottom of the equipment. Two
#10 x 2-1/2 inch screws and washers must be used to
fasten the unit securely to the bottom pad and wood
skid. This will ensure the proper equipment location
on the bottom pad. Failure to do this will result in
shipping damage.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition. If
a shipping carton or any of the interior part(s) are
needed, please call or write Customer Service Depart-
ment of McIntosh Laboratory. Refer to page 2. Please
see the Part List for the correct part numbers.
UNIT WITH
(4) FEET ON
BOTTOM COVER
PLASTIC FOOT
SPACER (4)
#10-32 X 3/4
MACHINE SCREW
WITH WASHER (4)
BOTTOM PAD
PLASTIC FOOT
SPACERS (2)
WOOD SKID
IMPORTANT
#10 X 1 3/4
(Read Above)
FLAT WASHER
#10 X 2-1/2"
SCREW (2)
INNER
CARTON
MA8950 Packing Material List
Quantity Part Number Description
1
4
1
1
1
1
2
2
2
4
4
4
TOP PAD
IMPORTANT
(Read Above)
033888 Shipping carton
033887 End Cap
033697 Inner carton
033725 Top pad
034576 Bottom pad
034480 Wood skid
017218 Plastic foot (spacer)
401204 #10 x 2-1/2 inch
wood screw
404033 #10 flat washer 1-3/4 inch
017937 Plastic foot
400159 #10-32 x 3/4 machine screw
404080 #10 flat washer
END CAP (4)
INNER
CARTON
SHIPPING
CARTON
19