Packing Instructions - McIntosh MA252 Owner's Manual

Packing Instructions

In the event it is necessary to repack the equipment
for shipment, the equipment must be packed exactly
as shown below. It is very important that the four feet
are attached to the bottom of the equipment. This will
ensure the proper equipment location on the bottom
foam pad. Failure to do this will result in shipping
damage.
To protect the tubes during shippment, the Foam
Insert removed from the MA252 needs to be re-insert-
ed. Follow the unpacking instructions on pages 4-5 in
the reverse order.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition. If
a shipping carton or any of the interior part(s) are
needed, please call or write Customer Service Depart-
ment of McIntosh Laboratory, refer to page 2. Please
see the Part List for the correct part numbers.
MA252 Packing Material List
Quantity Part Number Description
1 034580 Shipping carton
2 034582 Foam Top/Bottom
1 034577 Foam End Cap Pad Top
1 034578 Foam End Cap Pad Bottom
1 034581 Corrugated Bottom Pad
1 034579 Foam Insert (for protecting
the Tubes during shipping)
1 041855 Warning Sheet
4 400159 10-32 x 3/4 inch screw
4 163185 Feet
Warning Sheet
Foam Insert for Tubes
and Tube Shields
Foam End Cap Bottom
Foam Top/Bottom
Packing Instructions
Foam Top/Bottom
Accesories
Feet
Screws
Corrugated Bottom Pad
Shipping Carton
Foam End Cap Top
31