Advertisement
Quick Links
PRINCETON 44'' Media Fireplace
Model #
WS3060926FP
ADULT ASSEMBLY AND SET-UP REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Whalen Furniture Mfg., Inc.
1-866-942-5362
www.whalenfurniture.com
Or e-mail your request to parts@whalenfurniture.com
Date 2014-07-11 Rev. 1 Factory: DOGULU
LOT NUMBER:
DATE PURCHASED:
Page 1
/
/
Factory No. 15548
Advertisement
Related Manuals for Whalen WS3060926FP
Summary of Contents for Whalen WS3060926FP
- Page 1 Or visit our web site 24 hours a day, 7 days a week for product assistance at www.whalenfurniture.com Or e-mail your request to parts@whalenfurniture.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Whalen Furniture Mfg., Inc. Page 1 Factory No. 15548 Date 2014-07-11 Rev. 1 Factory: DOGULU...
-
Page 2: Quality Guarantee
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture. - Page 3 Model # WS3060926FP Important Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non- abrasive surface. You will need the parts identified on page 4 of this instruction manual. NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS.
-
Page 4: Parts And Hardware List
Model # WS3060926FP Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Mantel Base with Fireplace (1) B- Top Panel (1) C- Upper Back Panel (1) -
Page 5: Assembly Instructions
Model # WS3060926FP Assembly Instructions Cam Bolt (12 used in this step) ② 1. Unpack the unit and confirm that you have all the hardware and required parts. 2. With the help of an assistant, remove the Mantel Base (A) from the box, and place it near the final installation location. - Page 6 Model # WS3060926FP Assembly Instructions M8 x 30 mm Wood Dowel Cam Lock (3 used in this step) (6 used in this step) ③ ① 4. Insert one Wood Dowel (3) into the middle hole of the Upper Side Panels (D). Lightly tap in with a rubber mallet, if necessary.
- Page 7 Model # WS3060926FP Assembly Instructions Cam Lock M8 x 30 mm Wood Dowel Cam Lock Cover (6 used in this step) (3 used in this step) (14 used in this step) ① ④ ③ 8. Insert one Wood Dowel (3) into the middle end hole of the Upper Side Panels (D) and Partition Panel (E) respectively.
- Page 8 Model # WS3060926FP Assembly Instructions #6 x 1/2” Washer Head Screw (16 used in this step) ⑤ Fireplace 10. Now, go back and securely tighten all the Cam Locks and the Screws. Make sure that all the parts are tight and there are no gaps between the parts.
- Page 9 Model # WS3060926FP Assembly Instructions Shelf Support (8 used in this step) ⑥ 12. Open the side doors and insert the Shelf Support s (6) into the desired holes inside the side compartments. Make sure you place the four Shelf Support s in the same level so the shelf is not tilted. Properly rest the (F) onto the Shelf Support s (6).
- Page 10 Model # WS3060926FP Assembly Instructions Acrylic Stopper (1 used in this step) ⑦ NOTE: You must install the Acrylic TV Stopper to prevent the TV from tipping when placing your flat panel television directly on the Top Panel (B). 13. Remove the tape of the Acrylic Stopper (7) and place it in the cut-out of the acrylic stopper template on the front of the Top Panel (B).
- Page 11 Model # WS3060926FP Assembly Instructions Tools required: Phillips screwdriver, Power Drill, 3/8” Drill Bit and Rubber Mallet. 15. Ask for assistance to position the assembled mantel at the desired location against a wall. 16. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware Kit to attach the tip-over restraints to the unit and the wall, as shown in the illustration.
-
Page 12: Care And Maintenance
A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or shipping. We hope you enjoy your purchase for many years. Thank you for choosing Whalen Furniture! 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc.