Remove the FlexibleLOM adapter from the riser cage.
7.
To replace the component, reverse the removal procedure.
GPU
To remove the component:
Power down the server (on page 29).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 30).
o
Remove the server from the rack (on page 30).
o
Remove the access panel
4.
Disconnect all cables connected to existing expansion boards.
5.
("Access
panel" on page 36).
Removal and replacement procedures 59