HP ProLiant DL120 Gen9 Maintenance And Service Manual page 69

Hide thumbs Also See for ProLiant DL120 Gen9:

Table of Contents

Remove the clear processor socket cover. Retain the processor socket cover for future use.

Install the processor. Verify that the processor is fully seated in the processor retaining bracket by

visually inspecting the processor installation guides on either side of the processor. THE PINS ON THE

SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED.

CAUTION:

Do not press down on the processor. Pressing down on the processor may cause

damage to the processor socket and the system board. Press only in the area indicated on the

processor retaining bracket.

Removal and replacement procedures 69

Table of Contents