Advertisement
Owner's Guide and Installation Manual
5AB52XX Series Fan
UL Model No. : 5AB52
Attach sales receipt to this card and retain as your proof of purchase
RETAILER NAME:
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
13.5 kgs
29.8 lbs
Total fan weight
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Monte Carlo Fan Company 5AB52XX Series
Summary of Contents for Monte Carlo Fan Company 5AB52XX Series
- Page 1 Owner’s Guide and Installation Manual 5AB52XX Series Fan UL Model No. : 5AB52 Attach sales receipt to this card and retain as your proof of purchase RETAILER NAME: DATE OF PURCHASE: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 13.5 kgs...
- Page 2 All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers. Cutomer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2011 Monte Carlo Fan Company 1/9/2012...
- Page 3 Rotate fan so that the notch on the ball fully extended the leadwires are longer than the engages the ridge in the mounting bracket. This cable and no stress is placed on the leadwires. will allow hands-free wiring. © 2011 Monte Carlo Fan Company 1/9/2012...
- Page 4 Setting the reverse switch in the left hand side will result in downward air- flow and setting the switch in the right hand side will result in upward airflow. © 2011 Monte Carlo Fan Company 1/9/2012...
- Page 5 2.Check for loose or disconnected wires in fan switch housing. work: 3.Check for loose or disconnected wires in light kit. 4.Check for faulty light bulbs. CAUTION: Make sure main power is turned off before entering switch housing. © 2011 Monte Carlo Fan Company 1/9/2012...
- Page 6 Jan.2012 New format...
Need help?
Do you have a question about the 5AB52XX Series and is the answer not in the manual?
Questions and answers