Advertisement
Quick Links
Owner's Guide and Installation Manual
Downrod without light kit
Downrod with light kit
Flush Mount -No light kit
Flush Mount -Light kit
5AN52XXD-L Series Fan
UL Model No. : 14105
Attach sales receipt to this card and retain as your proof of purchase
RETAILER NAME:
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
10.6 kgs
23.32 lbs
Total fan weight with light kit
Advertisement
Related Manuals for Monte Carlo Fan Company 5AN52XXD-L Series
Summary of Contents for Monte Carlo Fan Company 5AN52XXD-L Series
- Page 1 Downrod without light kit Downrod with light kit Flush Mount -No light kit Flush Mount -Light kit 5AN52XXD-L Series Fan UL Model No. : 14105 Attach sales receipt to this card and retain as your proof of purchase RETAILER NAME:...
- Page 2 All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers. Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2013 Monte Carlo Fan Company 6/25/2013...
-
Page 3: Safety Cable Installation
Refer ing plate so that the motor is se- side of the outlet box and ungrounded conductor on the to Safety Tips section of manual. curely suspended. other side of the outlet box. © 2013 Monte Carlo Fan Company 6/25/2013... - Page 4 Attach blade assembly to the motor Remove 3 screws and lock washers and tighen the 2 screws pre-installed step 26. from the switch cap cover and save. to the blade bracket. Repeat 4 more times. © 2013 Monte Carlo Fan Company 6/25/2013...
- Page 5 Hand tighten chain through the hole in the finial. hex nut securely. Hand tighten the finial securely. © 2013 Monte Carlo Fan Company 6/25/2013...
- Page 6 Remove the cotter and keeper pins Thread leadwires and safety cable bracket .Securely tighten the lock- and save for later use. through the mounting plate. nuts onto the threaded studs. © 2013 Monte Carlo Fan Company 6/25/2013...
- Page 7 Refer Note:If Installing The Secondary Support Safety through the bracket. to Safety Tips section of manual. Cable in the U.S., Do Not Remove Knockouts In The Outlet Box. © 2013 Monte Carlo Fan Company 6/25/2013...
- Page 8 2 screws securely. Lift housing up aligning the L shape holes with the screws on the mounting plate. Turn housing clockwise to hold in posi- tion. Go to step 15 to finish installation. © 2013 Monte Carlo Fan Company 6/25/2013...
-
Page 9: Troubleshooting
Reset the lights by turning off the wall switch, breaker,or by remote. Replace bulbs with the correct wattage bulbs, turn the power on. CAUTION: Make sure main power is turned off before entering switch housing and/ or canopy. © 2013 Monte Carlo Fan Company 6/25/2013... - Page 10 Apr.2012 New format Jun.2013 Update for CUL regulation Aug.9.2013 update UL listed model number...