Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
5DIC44XXXD-V1 Series Fan
CUL Model NO. : 5DIC44XXXD-V1
RETAILER NAME:
RETAILER ADDRESS:
7.9 kgs
17.4 lbs
Total fan weight with light
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Monte Carlo Fan Company 5DIC44XXXD-V1 Series
Summary of Contents for Monte Carlo Fan Company 5DIC44XXXD-V1 Series
- Page 1 Owner’s Guide and Installation Manual 5DIC44XXXD-V1 Series Fan CUL Model NO. : 5DIC44XXXD-V1 Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 7.9 kgs...
-
Page 2: Cautions And Warnings
All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2018 Monte Carlo Fan Company 10/2018... - Page 3 Place yoke cover on top housing of fan. Warning: Cross pin and keeper pin must be installed securely, failure to install them will result in serious injury. © 2018 Monte Carlo Fan Company 10/2018...
- Page 4 Make sure the studs protruding from the up into the outlet box. bottom of the Mounting bracket are installed with threads all the way through the bracket. © 2018 Monte Carlo Fan Company 10/2018...
- Page 5 Safety Cable in the U.S., Do Not Remove the outlet box. The splices after being made Knockouts In The Outlet Box. should be turned upward and pushed carefully up into the outlet box. © 2018 Monte Carlo Fan Company 10/2018...
- Page 6 Twist clockwise till lock. Reinstall the screw removed in step 21. Tighten all screws securely. © 2018 Monte Carlo Fan Company 10/2018...
- Page 7 Twist clockwise till lock. operate. Reinstall the screw removed in step 23. Tighten all screws securely. Install fan and light kit pull chains to preassembled pull chains on fan. Pull chains provided. © 2018 Monte Carlo Fan Company 10/2018...
-
Page 8: Troubleshooting
5.Remove light kit and check the plug connections if they are present. 6.If this fan uses remote controller, make sure dip switches are setting properly and make CAUTION: Make sure main power is turned off before entering switch housing and/or canopy. © 2018 Monte Carlo Fan Company 10/2018... - Page 9 Nov.2018...
Need help?
Do you have a question about the 5DIC44XXXD-V1 Series and is the answer not in the manual?
Questions and answers