During First Use; Turning On The Appliance And Setting The Thermostat - Baumatic BRZ600.5 User Manual

o The interior of the appliance should be cleaned with a solution of
sodium bicarbonate dissolved in lukewarm water. The interior
and accessories should be thoroughly dried, after the cleaning
process has been completed.
o There can be an odour when you first switch on the appliance. It
will lessen as the appliance starts to cool.

During first use

o When you first switch on the appliance, the compressor will run
continuously for approximately 24 hours or until the freezer
reaches a cool enough temperature.
o During this period of time, you should try not to open the door
frequently or place a large amount of food within the appliance.
o If the unit is switched off or unplugged, you must allow at least 5
minutes before restarting the appliance on the thermostat or
connecting it to your mains supply.

Turning on the appliance and setting the thermostat

You switch on your appliance by connecting it to your mains supply
and setting the thermostat. The thermostat dial is located at the base
of the freezer.
o The thermostat automatically regulates the temperature inside
the freezer, depending on what number you have turned the
thermostat control knob to.
o Position <0> means that the appliance will not cool.
o Position <1> will give you a higher temperature inside the
freezer.
o Position <5> will give you a lower temperature inside the
freezer.
9