Table of Contents
Advertisement
o The interior of the appliance should be cleaned with
a solution of sodium bicarbonate dissolved in
lukewarm water. The interior and accessories
should be thoroughly dried, after the cleaning
process has been completed.
o There can be an odour when you first switch on the appliance. It
will lessen as the appliance starts to cool.
During first use
o With dry hands, connect your appliance to your mains supply.
Set the thermostat control knob to position <4> for a 24 - 48
hour period, before positioning it to the normal setting of
between <2> and <3>.
o When you first switch on the appliance, the compressor will run
more frequently for approximately 24 - 48 hours.
o During this period of time, you should try not to open the door
frequently or place a large amount of food within the appliance.
o If the unit is switched off or unplugged, you must allow at least 5
minutes before restarting the appliance on the thermostat or
reconnecting it to your mains supply.
Switching on the appliance and setting the thermostat
o You switch on your appliance by connecting it to your mains
supply and setting the thermostat. The thermostat dial is located
by opening the door of the freezer and looking above the freezer
flap at the top of the freezer.
o The thermostat automatically regulates the temperature inside
the freezer. The temperature is affected by the number that the
thermostat dial is set to.
o The black dot position means that the appliance will not cool.
9
Advertisement
Table of Contents
