Table of Contents
Advertisement
Levelling the appliance
o If the freezer is not levelled during installation, the doors may
not close or seal properly causing cooling, frost or moisture
problems.
o To level your freezer you may either turn the levelling foot
clockwise to raise that side of the freezer or anti-clockwise to
lower that side.
WARNING: This process should be carried out by two people.
While one person adjusts the levelling foot, the other should
push against the top of the freezer to take some weight off the
levelling foot. This makes it easier to adjust the levelling foot.
Reversing the door
IMPORTANT: BEFORE COMMENCING THE DOOR REVERSAL
PROCESS THE APPLIANCE MUST BE DISCONNECTED FROM
YOUR MAINS SUPPLY.
o We suggest that two people complete the door reversal process.
o We recommend that the door reversal process is done before the
appliance is placed in its final position.
o If food is already stored inside of it, then this must all be
removed before beginning the door reversal process.
To change the door opening direction, please follow the instructions on
the following pages:
18
Advertisement
Table of Contents
