Adding Rinse Aid - LG LD-1481W4 Owner's Manual

BEFORE USING FOR THE FIRST TIME
Step 4. Adding rinse aid
Rinse aid must not be added if dish washing tablets are used which contain a built in Rinse
aid. Too much or too little rinse aid can inhibit the drying performance.
1
3
※ Rinse level setting
NOTE
• If, after washing, you notice cloudy spots, streaks or water marks on your glassware, you
need to increase the setting level. If the glass is smeared or foam is present on the bottom,
select a lower setting.
CAUTION
• If the rinse aid compartment flap is not closed properly, a large amount of rinse aid will release
into the tub and cause washability problems.
2
4
You can adjust the quantity of rinse from level 1 to
•
level 6.
The higher the level, the more rinse aid dispensed.
•
If drying performance is not good, adjust the indicator
•
to a higher level.
17
1) Press the lever on the top of the
rinse aid compartment so that
the flap opens.
2) Pour the rinse up to the
maximum level indicator at the
bottom.
3) Adjust the quantity of rinse by
rotating the adjuster.
4) Close the cap after adjustment.