Lower Spray Arm - LG LD-1481W4 Owner's Manual

USER MAINTENANCE & CLEANING INSTRUCTIONS
To maintain performance and prevent malfunctions, it is important to check the inside
of the dishwasher, including filters and nozzles, at regular intervals.

Lower Spray Arm

Before cleaning the spray arms, remove the lower
rack from the dishwasher.
1. Check whether the holes of the lower
spray arms are blocked.
2. Remove the lower spray arm by pulling it
up with two hands.
3. Apply the same cleaning method as the
upper spray arm to clean any blocked
holes.
4. After cleaning, refit the lower spray arm
back into its position by pushing it down
firmly.
! Check point
• Excessive force for removing the lower
nozzle may cause damage to the
dishwasher or physical injury to hands
by hitting the upper rack. So, slowly
remove and refit it with two hands at all
times.
NOTE
• If regional water contains a lot of foreign substances (small grains of sand), the water
supply flow into the unit may be obstructed as the inlet hose filter may become blocked. To
prevent this from occurring, clean it on a regular basis.
Water Inlet Hose
<Normal>
1
1. Turn off the water supply. Disconnect the
water supply hose from the dishwasher.
2. Remove the filter with a long nose plier.
3. Clean the filter in the supply hose under
running water.
4. Reconnect the water supply hose to the
tap.
(Securely fasten them to prevent water
leak)
31 31
<Abnormal>
2
3