Function Of Control Buttons - LG LD-1481W4 Owner's Manual

FUNCTION OF CONTROL BUTTONS

① Process Indicator
• Indicates current program phase.
• The Wash, Rinse and Dry lamps will flash during each phase of washing process.
• The Clean lamp flashes for 4 minutes at the end of the cycle.
② Salt & Rinse Refill Indicator
•    S alt : Refill with special salt when the Salt lamp turns on.
•    R inse : Refill with rinse aid when the Rinse turns on.
③ Half Load
• In case of a small load, use upper or lower rack to save energy.
• With each press, you can select the Upper or Lower rack only.
• In case you don't select this button, the machine always operates the vario washing, which operates the upper and lower
spray arm alternately.
④ Extra Hot & Child Lock Indicator
• Lamp will turn on when the Extra Hot setting is on.
• Lamp will turn on when the Child Lock setting is on.
⑤ Time Left
•  B efore starting, the display window shows the running time of the selected program(except for the Auto programme).
•   A fter starting, the display window shows the remaining time.
• If the dishwasher has a problem, the error type will be displayed. (OE, IE, AE(EI), FE, HE, tE, LE, nE)
•  I f these error letters are displayed, please refer to the trouble shooting on page 29 and follow the guide.
⑥ Delay Start
• If you want to delay the start of the selected program, press this button.
• Press this button to increase the starting time by 1 hour increasements.
• The delay start time can be adjusted from 1 hour to 19 hours.
⑦ Program
•  P ress the cycle that corresponds to your desired wash cycle.
⑧ Extra Hot
•  I f you select the Extra Hot function, the operating temperature will be up to 80ºC.
(Dual Intensity, Auto, Eco, Eco and Soft Spray)
①
NOTE
The Dishwasher can be used without salt if not required,
however, the hardness level will need to be set to H0 so
that the indicator does not remain lit. (See page 14.)
12 12