Setting Up The Softening System Level (Hardness Level) Of Your Dishwasher - LG LD-1481W4 Owner's Manual

BEFORE USING FOR THE FIRST TIME
Step 2. Setting up the softening system level (hardness level)
of your dishwasher
For effective washing performance, adjust the setting corresponding to the hardness level of water
used in water supply. The water softener has 8 adjustment levels, and the dishwasher is programmed
at the factory for a water hardness level of H00. You can check the default setting value and adjust it
in the following manner:
* The display may vary, depending on the model.
NOTE
• The 'Salt Filling' light turns on in the display if salt is not in the softening system.
• If the hardness setting is set to H0, no light turns on in case of no salt.
15
1. Press Half Load
and Power button
simultaneously.
(Current setting value
indicated.)
2. Press the Half Load
button, and then set
up your intended
value.
(Scope of setting
value : H00~H07)
3. Press the Delay Start
button for saving the
setting.
(The power turns off
upon the saving.)