LG LD-1481W4 Owner's Manual page 33

TROUBLE SHOOTING GUIDE
Display code (Condition & Error code)
What to do when you see condition & error code.
Symptom
The display shows
IE code.
The display shows
OE code.
Possible Causes
Water is not properly supplied.
• Bent water supply hose.
• Less than 50kpa of water pressure
• The filter of the water supply hose
is clogged
• Frozen water in the water supply
part in winter.
Drainage problem.
• Clogged drainage hose (Condition
& Error code)
• The filters inside the dishwasher
are clogged.
• Bent drainage hose
• Wrong installation of drainage
hose. (drainage connection point is
not drilled out)
• Wrong installation of the connecting
part of drainage hose
Check water outage or
the valve of water supply
connecting part.
Clean the water supply valve
filters.
Call for service if the same
problem occurs again.
Clean the drainage hose.
Clean the filters.
Check the installation of the
drainage hose.
Call for service if the same
problem occurs again.
33
Solution