3G/4G Module Usim Card Installation - MAXDATA M-Book 6000 G4 User Manual

3G/4G Module USIM Card Installation

If you have included an optional 3G/4G module in your purchase option, follow the instructions below to install
the USIM card (which will be provided by your service provider), and then use the Charms Bar Wireless icon
to access the 3G/4G network in the same manner as the WLAN (see page
1. Turn off the computer, and turn it over and then remove the battery (slide the latches in the direction indicated
below and slide the battery out).
2. Insert the USIM card into the slot at the rear of the battery compartment, as illustrated below, until it clicks fully
into position, and replace the battery.
Figure 1 - 9 - Battery Removal & USIM Card Insertion
7 - 69).
3G/4G Module USIM Card Installation 1 - 17
Quick Start Guide

USIM Card
Orientation
Note that the USIM
card's readable side
(with the gold-colored
contacts) should face
upwards as illustrated.
1