Test Transmission Time Of Day; Communicator Format Options - DSC WLS900 Installation Manual

Hide thumbs Also See for WLS900:

Table of Contents

[40]

Test Transmission Time of Day

This section determines when the Periodic Test Transmission will be made, or when the

Downloading computer will be called if Periodic Downloading is enabled.. Enter a 4-digit time-

of-day in the 24-hour clock format; enter 00 to 23 for the hour, and 00 to 59 for minutes.

To disable the test transmission, program '00' or 'FF' as the Periodic Test Transmission

Reporting Code in Section [38]. Periodic Downloading is enabled in Section [70].

[41]

Enter a 2-digit code from the list below to determine which communication format will be used

for transmissions.

If the system is to report to a Sur-Gard MLR or SLR Series central station receiver, use

format [4] with 4/2 non-extended reporting.

Silent Knight / Ademco Slow 10 BPS, 1400Hz handshake

3/1, 4/1 and 4/2 non-extended format

Sescoa, Franklin, DCI, Vertex 20 BPS, 2300Hz handshake

3/1, 4/1 and 4/2 non-extended format

Sescoa, Franklin, DCI, Vertex 20 BPS 1400Hz handshake

3/1, 4/1 and 4/2 non-extended format

Radionics 40 BPS 1400Hz handshake

3/1 and 4/2 non-extended format

Radionics 40 BPS 2300Hz handshake

3/1 and 4/2 non-extended format

Radionics 40 BPS with Parity 1400Hz handshake

3/1 and 4/2 non-extended format

Radionics 40 BPS with Parity 2300Hz handshake

3/1 and 4/2 non-extended format

10 BPS and 20 BPS Formats

10 BPS is the standard slow format used on Silent Knight and Ademco receivers.

Data = 1900Hz, Kissoff = 1400Hz, Speed = 10 baud

20 BPS is the standard fast format used on DCI, Franklin, Sescoa and Vertex receivers

Data = 1800Hz, Kissoff = 2300Hz, Speed = 20 baud

•

Indicates default setting

Chapter 9: Communications Programming Sections

Table of Contents