PERIODS OF NON USE
If you are not planning to use the blast chiller for a long period of
time clean it thoroughly both inside and outside, coat the external
surfaces with oil-based protective products specially designed for
use on stainless steel and leave the cabinet door slightly open.
Caution! Keep the equipment disconnected from the power
supply until it is used again.
Caution! Before using the blast chiller again check to make sure it
is in good condition and clean it thoroughly.
Caution! In the case of any equipment malfunction, before calling
the retailer and requesting service, check that the power cable is
plugged in properly and that power is available.
If the blast chiller is still not working call the retailer and provide
the following information:
• data on the serial plate
• date of purchase
• alarm code (if any) shown on the display (for example AS2)
Caution! Do not attempt to repair the equipment or any of its
parts, as this could be dangerous and void the warranty; refer
exclusively to qualified and authorised technicians.