Kenmore 253.17202 Use & Care Manual page 10

Optional Features
the options menu on the control panel
and press and hold the "set" button for 3
seconds once the indicator is highlighted
next to "power off". "Power off" will be
displayed on the control panel to indicate
that the unit is in the power off mode.
To turn power back on to the unit, press
and hold the "set" key for 3 seconds. The
power off indicator will be removed from
the control panel, and the set point of the
unit will be displayed again.
Power Fail
If your unit has lost power, the control
panel will display "power fail" and the
number of hours that your unit has been
without power, up to a maximum of
50 hrs. The alarm will sound until the
condition is acknowledged by pressing
the set button or any other button on the
control panel.
Door Ajar
If your door has been left open for more
than 5 minutes, the control panel will
display "door ajar" and will sound an
alarm until the door has been closed or
any button is pressed on the control panel.
If a button on the control panel has been
pressed but the door has not been closed,
"door ajar" will continue to be displayed
on the control panel until the door has
been closed.
Sabbath Mode
The Sabbath mode is a feature that
disables portions of the appliance and its
controls in accordance with observance of
the weekly Sabbath and religious holidays
within the Orthodox Jewish community.
To turn Sabbath mode on, press and hold
the "Options" button and "^" button
for 5 seconds, after which "Sb" will be
displayed on the control panel indicating
that the unit is in Sabbath mode. To
exit Sabbath mode, press and hold the
"Options" button and "^" button for 5
seconds, after which the display will return
to the set point of the unit.
In the Sabbath mode, the High Temp
alarm is active for health reasons. If a
high temperature alarm is activated during
this time, for example, due to a door left
ajar, the alarm will sound for about 10
minutes. The alarm will then silence
on its own and a "high temp" icon
will be displayed on the control
panel. The high temp icon will continue
to display, even if the door is closed, until
Sabbath mode is exited and the icon reset.
For further assistance, guidelines of proper
usage and a complete list of models with
the Sabbath feature, please visit the web
at http:\\www.star-k.org.
NOTE
While in Sabbath mode, neither the
lights nor the control panel will work until
Sabbath mode has been deactivated.
The unit stays in Sabbath mode after a power
failure recovery. It must be deactivated with
the buttons on the control panel.
Temp Alarm
This feature is designed to provide a warning
if the inside temperature reaches an unsafe
level. The temperature feature operates on
household electricity. It will not function if
household electricity is interrupted.
To silence the alarm, press the set button
next to the ALARM OFF indicator on the
display or any key on the control panel.
Electronic Temp Alarm
If a malfunction causes an unsafe
temperature inside the unit, the high temp
will display on the control panel and the
alarm will sound. To silence the alarm,
press the set button next to the "alarm off"
indicator on the display or any key on the
control panel.
10