Pc-Connection Mode - SiPix STYLECAM EXTREME Owner's Manual

3. DPOF
Digital Print Order Format setting allows you to select
the number of copies you want to print, the time/date
stamped on the prints, and any other options there
may be for printing.
Please follow the flow chart on the right to configure
your DPOF setting.
There are three options under DPOF: print one image,
print all images, and print time/date stamp.
You can only use the DPOF when you have images
saved on a memory card. The DPOF feature does not
work for images saved on the 16MB built-in memory.
Page Up
Page Down
22

6-5 PC-Connection Mode

The PC-Connection mode allows you to download the
images to your computer or use the StyleCam Extreme as
a PC camera.
Downloading Images Using Mass Storage
1. Turn the Mode Selector to PC, and power ON the
camera by sliding the lens cover to the left.
2. The LCD monitor will display two options: Mass Storage
and PC Camera.
3. Select Mass Storage and press Menu/OK button.
4. A USB icon will blink in the LCD monitor. At this point you
should connect the StyleCam Extreme to your computer
with the supplied USB cable. Please refer to "Getting
Connected" and "Downloading Images" in Section 8 for
more information on how to connect the camera to your
computer and downloading images.
Using the StyleCam Extreme as a PC Camera
You can use the StyleCam Extreme as a PC camera with the
included ArcSoft VideoImpression software. Please follow the
instructions below to use the PC camera feature.
1. Turn the Mode Selector to PC mode.
Power ON the camera by sliding the lens cover/power switch to
the left.
2. The LCD will display Mass Storage and PC Camera, select
PC Camera and press the MENU/OK button.
23