SiPix STYLECAM EXTREME Owner's Manual page 10

after the second beep. Please do not move the camera until you
hear the second beep after you release the Shutter button.
Moving the camera may result in blurry images.
4. You may also use the Flash button to set the desired flash
mode: Auto, red-eye reduction and flash off.
5. Press the Display button to choose your desired LCD display.
(Please refer to "Display Button" on page 10 for more
information)
6. Use the Menu/OK button to quickly access the Capture
mode menu and choose your desired Capture mode settings.
(E.g. image resolution, image quality, self-timer, and light
frequency settings.) To confirm a selection, press the
Menu/OK button.
7. To zoom in or zoom out on a subject, press the up and down
arrow buttons / . Once you press one of the zoom button,
the digital zoom level on the left side of the LCD monitor will
appear.
8. To take a picture close-up you can use the Macro mode.
Slide the Macro switch down (located on the right side of the
camera). When the Macro mode is selected, the macro LED
located on the top of the LCD monitor will light.
The following chart shows the icons that will display on your
LCD monitor.
3 Mega Pixel enhanced resolution
2.0 Mega Pixel effective resolution
1.3 Mega Pixel compressed
resolution
Superfine mode
Fine mode
White balance – auto mode
White balance – daylight mode
White balance – fluorescent mode
White balance – tungsten mode
Self-timer – ON
Self-timer – OFF
18
Please refer to the following flow chart to select the operation
setting in the Capture mode. Use Menu/OK and Navigation
buttons to follow the directions and links by the arrows.
Image Resolution:
19