Graco GH 16U277 Repair Manual page 26

Replacing Oil Reservoir
3. Replace bolts (86) and nuts (84). Tighten bolts.
Torque to 125 + 10 in-lb (14 + 1.1 N•m).
4. Connect coolant line to reservoir (64). Torque to 225
in-lb (14.1 N•m).
5. Reattach return lines (100, 101). Torque three times
to 450 + 10 in-lb (51 + 1.1 N•m).
101
100
6. Install filter (107).
107
26
ti20941a
ti20953a
ti21063a
7. Reattach suction hose (153). Toque to 600 + 10
in-lb (68 + 1.1 N•m).
ti20934a
8. Verify drain plug has been replaced. Fill oil reservoir
with oil to high mark on dip stick (approximately 3.5
gallons).
ti20935a
9. Replace cap (27).
27
153
Drain Plug
ti20933a
332157A