Table of Contents
Advertisement
Telephone operation
Intercom
The intercom feature allows conversation between two
registered handsets of the same system.
Model DS6121-2
1.
Press INT on the originating handset when the handset is not in
use and its screen displays CALLING OTHER HANDSET.
2.
The destination handset rings and its screen displays
OTHER HANDSET IS CALLING.
3.
To answer the intercom call, press
INT or any dialing key (0-9,#, * ) on the destination handset.
4.
To end an intercom call, press INT, OFF/CLEAR or place
the handset back in the telephone base or charger.
Models DS6121-3/DS6121-4/DS6121-5/DS6122-5
1.
Press INT on the originating handset when the handset is
not in use. The screen displays INTERCOM TO:
2.
Use the dialing keys to select the destination handset. The
originating handset screen displays CALLING HANDSET X.
3.
The destination handset rings and its screen displays
HANDSET X IS CALLING.
4.
To answer the intercom call, press
INT or any dialing key (0-9,#, * ) on the destination handset.
To end an intercom call, press INT, OFF/CLEAR or place
5.
the handset back in the telephone base or charger.
/FLASH,
/SPEAKER,
/FLASH,
/SPEAKER,
www.vtechphones.com
•
CALLING
OTHER HANDSET
OTHER HANDSET
IS CALLING
INTERCOM TO:
CALLING
HANDSET X
HANDSET X
IS CALLING
If the destination
handset does
not answer
the intercom
call within 100
seconds, is in
the directory, is
in the call log,
is on a call, or
out of range,
the originating
handset screen
will display
UNABLE TO
CALL TRY AGAIN
and return to idle
mode.
15
Advertisement
Table of Contents
